How do I Reset Linksys Router to Factory Settings?

 Are you facing an internet connecting problem or some other issues with your router device? Do you forget the password of the Linksys router? Having an issue in accessing myrouter.local setup webpage? Well, you can easily fix all of the above-mentioned issues by resetting your Linksys router to the factory default settings. Some reasons for performing the reset operation are to do the fresh installation, failure of firmware update, and forget the password. In this blog, we have shared some simple guidelines that help you in resetting the Linksys router to the factory settings. It includes resetting the Linksys router to the factory default either using manual method and web page setup method. With these two methods, you can easily reset the Linksys wireless router. 

myrouter.local setup


Steps to Reset the Linksys Router to Factory Default Settings

Method 1: Through Manual Method

If you forget the Linksys router password or web based setup page then follow the below-mentioned steps to reset the Linksys router to the factory default settings:

Step 1: Firstly, search the reset button on your Linksys router at its back side.

Step 2: Press the reset button on your Linksys router for 10-15 seconds by using the paper clip or needle. 

Step 3: Release the reset button once you see the orange power LED light blinks on your wireless router. After that, the device will restart.

Step 4: Once the device is rebooted successfully, it is set to the original factory default settings.

Step 5: When resetting is completed, unplug or re-plug the power adapter of the Linksys router. 


Method 2: Using Web Page Setup Method

Go through the below mentioned instructions to reset the Linksys router by using the web based setup method. It helps in restoring the original factory default from the web admin interface. Here’s are the steps: 

Step 1: Firstly, connect your computer to the router.

Step 2: Launch an internet browser of your choice and enter myrouter.local setup in the URL bar of the web browser. You can also enter the IP address 192.168.1.1 to access the Linksys router setup page. 

Step 3: When the system asks then enter the default login credential details of your Linksys router. Both the default username and password is “admin”. If you have changed the default login credential details then enter the changed details. 

Step 4: Click on the Administrative tab when the web-based setup web page of the router displays on the screen. 

Step 5: Next, click on the Factory defaults.

Step 6: At last, hit on the Restore Factory Defaults button.


With the above mentioned instructions, you can successfully reset the Linksys router and reconfigure its settings by accessing myrouter.local setup webpage. Although, if you have any doubt or are facing issues in resetting your Linksys router even after following the above steps then you can contact our professional experts. Our experts have experience in resolving the issues in finger-tips without any difficulty. 


Comments

Popular posts from this blog

How Do I Upgrade WiFi Repeater Firmware Version?

How to Access the Wireless-N WiFi Repeaters

How To Perform the WiFi Repeater 192.168.10.1 Admin Setup?